We use cookies to ensure that we give you the best experience on our website. By closing this message, you consent to our cookies on this device in accordance with our cookie policy.
We are exhibiting at
Visit us on Stand D69
For use where screw-fixing to the panel is not possible and bonding is the preferred option. It can be either surface-mounted or semi-rebated and works with a broad range of materials.
The Fix housing is moulded from ABS and the Button is 30% glass filled nylon PA6 - both strong and robust engineering polymers. There are many structural adhesives suitable for bonding ABS to a wide range of panel materials, for example, a 2-part structural acrylic adhesive, a matched adhesive for solid surface (Corian®, Hanex®, etc.) or solvent weld for bonding to acrylic.
As a general guide, four Button-fix Type 1 Bonded fasteners on a vertical panel will support loads weighing up to a maximum of 80kg (175lbs), however, this can vary significantly depending on the adhesive and substrate material combination. Always follow the adhesive manufacturer’s recommendations on substrate suitability, preparation and loadings. Manufactured in the UK.
Please email our technical team and we'll be happy to help:
With the correctly matched adhesives, Type 1 Bonded connectors are ideal for:
The Type 1 Bonded Fix can be surface-mounted, creating an 8mm gap between the panels, or semi-rebated to reduce the gap to approximately 2mm. Engage the Buttons in the Fix and slide the panel down by 15mm, until Button-fix goes 'click'. The Type 1 Bonded Button-fix can be configured for sideways assembly too.
The Button Marker for both Type 1 and Type 3 helps to quickly and accurately align the Button-fix installation, reducing the need for measuring and marking out.
Snap a marker into each Fix, then position the second panel and press firmly. The marker points will leave indents in the panel surface, which can be used as pilot guides for the Buttons.
The Multijig helps when machining the oval recesses required for rebated configurations of Button-fix.
The Multijig frame is clear acrylic, so that you can see the workpiece below, and has printed guide marks. It has three clearly labelled apertures dimensioned to suit the Type 1, Type 1 Flush, Type 1 Bonded and Type 1 Metal Fixes.
Self-adhesive Fix-pads for Type 1 Bonded are ideal for light duty applications where speed of assembly is important.
For the best results we advise that the Fixes are used in the rebated configuration.
 |
 |
 |
 |
 |
 |
|
| Features of the Fix | Type 1 | Type 1 Flush | Type 1 Bonded | Type 1 Metal | Type 2 | Type 3 |
|---|---|---|---|---|---|---|
| Material | Nylon PA6 | Nylon PA6 | ABS | Zinc alloy | Nylon PA66 | PBT |
| Connects face-to-face | ||||||
| Connects at 90° | ||||||
| Drop down or sideways engagement | ||||||
| Push-on engagement | ||||||
| For use on fire-retardant panels | ||||||
| Surface-mounted | ||||||
| Semi-rebated/recessed | ||||||
| Fully rebated/recessed | ||||||
| Attached with screws | ||||||
| Bonded | ||||||
| Minimum panel thickness | 10mm (1) | 18mm (2) | No restriction | 10mm (1) | 10mm (1) | 10mm |
| Marker accessories (available separately) | ||||||
| Router multijig (available separately) |
VCG stand at the Business Design Centre, London
Corian stand at the Retail Design Expo, Olympia, London. CD UK
Corian stand at the Retail Design Expo, Olympia, London. CD UK
TAG Station emergency evacuation sign system. TagEvac
TAG Station emergency evacuation sign system. TagEvac
TAG Station emergency evacuation sign system. TagEvac
Trespa wall panels in a commercial building in Santiago. Eurowall Chile
Trespa wall panels in a commercial building in Santiago. Eurowall Chile
Trespa wall panels in a commercial building in Santiago. Eurowall Chile
Trespa wall panels in a commercial building in Santiago. Eurowall Chile
