Type 1 Flush
A fully-recessed connector solution
For applications where panel-to-panel contact is required. It fits a simple oval rebate and can be rebated into the edge of a panel of at least 28mm thick or the face of a panel of at least 18mm thick.
Using Type 1 Flush Button-fix
Like other Button-fix products, Type 1 Flush Button-fix allows panels to be recessed so that when fixed together there is no gap between them.
Typical uses include:
- Reception & bar counter cladding
- Furniture construction
- Exhibition stand construction
- Video/media walls
Technical Information
Dimensions and materials
- The Fix is moulded from 30% glass filled nylon PA6
- The Button is moulded from 30% glass filled nylon PA6
- Manufactured in the UK
Click here to download DXF CAD drawings
Download instructions for how to use Button-fix Type 1 Flush
Read Roger Bisby's product review
Button-fix Features Guide.
![]() |
![]() |
![]() |
![]() |
![]() |
|
Features of the Fix | Type 1 | Type 1 Flush | Type 1 Bonded | Type 1 Metal | Type 2 |
---|---|---|---|---|---|
Material | Nylon PA6 | Nylon PA6 | ABS | Zinc alloy | Nylon PA66 |
Connects face-to-face | |||||
Connects at 90° | |||||
Drop down or sideways engagement | |||||
Push-on engagement | |||||
For use on fire-retardant panels | |||||
Surface-mounted | |||||
Semi-rebated/recessed | |||||
Fully rebated/recessed | |||||
Attached with screws | |||||
Bonded | |||||
Minimum panel thickness | 10mm (1) | 18mm (2) | No restriction | 10mm (1) | 10mm (1) |
Marker accessories (available separately) | |||||
Router multijig (available separately) | |||||
Multilingual instructions on the website | |||||
Independent load test reports (3) | |||||
2d DXF downloads on the website | |||||
3d CAD files available on request |
- (1) 10mm minimum with Varianta/Euro screws; 15mm minimum with wood screws
- (2) Minimum panel thickness 28mm when rebating into the edge of the panel
- (3) Type 1 Bonded test reports for specific adhesive/substrate combinations only
Other Products

Type 1
Connects parallel panels where the emphasis is on strength. Highly versatile, it can be surface-mounted or semi-rebated into the panel, orientated for vertical or sideways assembly.
View this product
Type 1 Bonded
For use where screw-fixing to the panel is not possible and bonding is the preferred option. It can be either surface-mounted or semi-rebated and works with a broad range of materials.
View this product
Type 1 Metal
Ideal for use with fire-retardant panels, the Type 1 Metal is a highly versatile and reliable fastener that has been independently tested for strength and under shock loads and vibration.
View this product
Type 2
Connects panels at 90° and engages with a straight push. Ideal for panels with no clearance above or at the side and applications where the emphasis is on ease of access.
View this product