Button Marker Type 1
The Button Marker for Type 1 helps to quickly and accurately align the Button-fix installation, reducing the need for measuring and marking out.
Snap a marker into each Fix, then position the second panel and press firmly. The marker points will leave indents in the panel surface, which can be used as pilot guides for the Buttons.
Button-fix Features Guide.
![]() |
![]() |
![]() |
![]() |
|
Features of the Fix | Type 1 | Type 1 Flush | Type 1 Bonded | Type 2 |
---|---|---|---|---|
Connects face-to-face | ||||
Connects at 90° | ||||
Drop down or sideways engagement | ||||
Push-on engagement | ||||
Suitable for ceiling panels | ||||
Surface-mounted | ||||
Semi-rebated/recessed | ||||
Fully rebated/recessed | ||||
Attached with screws | ||||
Bonded | ||||
Minimum panel thickness | 10mm (1) | 18mm (2) | No restriction | 10mm (1) |
Marker accessories (available separately) | ||||
Router multijig (available separately) | ||||
Multilingual instructions on the website | ||||
Independent load test reports (3) | ||||
2d DXF downloads on the website | ||||
3d CAD files available on request |
- (1) 10mm minimum with Varianta/Euro screws; 15mm minimum with wood screws
- (2) Minimum panel thickness 28mm when rebating into the edge of the panel
- (3) Type 1 Bonded test reports for specific adhesive/substrate combinations only
Other Products

Type 1
Connects parallel panels where the emphasis is on strength. Highly versatile, it can be surface-mounted or semi-rebated into the panel, orientated for vertical or sideways assembly.
More
Type 1 Flush
For applications where panel-to-panel contact is required. It fits a simple oval rebate and can be rebated into the edge of a panel of at least 28mm thick or the face of a panel of at least 18mm thick.
More
Type 1 Bonded
For use where screw-fixing to the panel is not possible and bonding is the preferred option. It can be either surface-mounted or semi-rebated and works with a broad range of materials.
More