Home   /   Products   /   Type 1

Type 1

For connecting panels where proven strength is paramount

Connects parallel panels where the emphasis is on strength. Highly versatile, it can be surface-mounted or semi-rebated into the panel, orientated for vertical or sideways assembly.

  • Button Fix Type 1

Watch the video

Using Type 1 Button-fix

When the highest strength panel fitting is required, the Type 1 Button-fix is the one to use.

Typical uses include:

  • Wall & ceiling panels
  • Acoustic panels
  • Mirror panels
  • Shelf units & shop displays
  • Upholstered panels & banquette seating

 

Technical Information

Dimensions and materials

  • When surface-mounted, panel gap = 8mm
  • When rebated, panel gap = 3mm
  • The Fix is moulded from 30% glass filled nylon PA6
  • The Button is moulded from 30% glass filled nylon PA6
  • Manufactured in the UK

Click here to download DXF CAD drawings.

Click here to download instructions for Button-fix Type 1


 

Accessories

accessories_marker_type_1   accessories_multijig

Button-fix Features Guide.

Features of the Fix Type 1 Type 1 Flush Type 1 Bonded Type 2
Connects face-to-face
Connects at 90°
Drop down or sideways engagement
Push-on engagement
Suitable for ceiling panels
Surface-mounted
Semi-rebated/recessed
Fully rebated/recessed
Attached with screws
Bonded
Minimum panel thickness 10mm (1) 18mm (2) No restriction 10mm (1)
Marker accessories (available separately)
Router multijig (available separately)
Multilingual instructions on the website
Independent load test reports (3)
2d DXF downloads on the website
3d CAD files available on request
  • (1) 10mm minimum with Varianta/Euro screws; 15mm minimum with wood screws
  • (2) Minimum panel thickness 28mm when rebating into the edge of the panel
  • (3) Type 1 Bonded test reports for specific adhesive/substrate combinations only

Other Products

Product Thumbnail

Type 2

Connects panels at 90 degrees and engages with a straight push. Ideal for panels with no clearance above or at the side and applications where the emphasis is on ease of access.

More
Product Thumbnail

Type 1 Flush

For applications where panel-to-panel contact is required. It fits a simple oval rebate and can be rebated into the edge of a panel of at least 28mm thick or the face of a panel of at least 18mm thick.

More
Product Thumbnail

Type 1 Bonded

For use where screw-fixing to the panel is not possible and bonding is the preferred option. It can be either surface-mounted or semi-rebated and works with a broad range of materials.

More
Product Thumbnail

Button Marker Type 1

The Button Marker for Type 1 accurately aligns the Button-fix, dramatically speeding up the marking out stage.

More
Share
When speed, strength and precision are important, button-fix is the only fix

Where to buy

Button-fix is available worldwide. Click below to find a stockist.

follow us on Twitter @ButtonfixUK

@speedydotsocial you can email us direct on info@button-fix.com
10 Jul   |   View on twitter
RT @RFMedia1: Too hot in the office today. Lots of new sites though flying off the line! Here one to check out: https://t.co/XNSIApANIh
06 Jul   |   View on twitter
RT @carlswoodshop: The blog has been quet for some time, but we haven't been sitting still. Today we start building two new pieces of furni…
06 Jul   |   View on twitter